Best Electrician Tool Belt & Cable Tech (Review & Buying Guide) in 2019

Last Updated on

A tool belt is a part of your work-wear and helps you to keep your must-have tools close by. A proper tool belt allows you to focus on your work rather than worrying about your tools. An electrician or cable technician need the best tool belt for their job done properly.

An electrician needs a variety of tools for his work. If you are an electrician or a cable tech, sometimes you don't know which tools you need for a job. So, It's not wise to carry a huge toolbox with you.

The right electrician tool belt will allow you to carry all your tools comfortably anywhere you go for work.

If you already have a tool belt, you can check the best toolbox/chest in the market.

Checklist for buying an electrician and cable tech tool belt

Tool belts are really important for the professionals. If you are an electrician or cable technician having a tool belt is absolutely necessary.

A decent tool belt can cost you from $50 to $200 or more.

We will discuss the most important checklist that you should consider before buying an electrician and cable technician tool belt.

Here is the checklist -Although both of the profession has a different name, somewhere along the way there are few similarities about what they do. Hence, their tool belts are also quite similar but definitely not identical.

Cable technicians have to install, maintain and repair internet services and residential cable televisions.

A basic list of tools for cable technician includes cable installer, cable tester, cable tracker, wire connectors, along with basic wire cutters, pliers, wire strippers, screwdrivers, tape and many more.

An electrician is responsible for electrical wiring of buildings, stationary machines, and related equipment.

A basic list of tools for an electrician includes screwdrivers, hammer, pliers, knives, wire cutter and strippers, hacksaws, drills and many more.

So you get the idea why both of them have a different tool belt. But when you want to buy the best tool belt for both of the profession, these are the things that you should consider.

The right category

Make sure you are buying the right type of tool belt, and it has the capacity to hold all your tools accordingly. If you are a cable tech then you should go for those made for cable technician, and the other way if you are an electrician.

What should a Cable operator tool belt contain?

Tools you often use include a coax connector compression tool, snips, cable cutters, pliers, Measuring devices, Labeling machines, power saws, wire strippers and a continuity tester to name a few.

Some essential tools for electrician-Small notebook and pen,Fish Tape, Tape Measure, Tongue Tester (Multimeter), Set of basic screwdrivers, Straight-Blade Screwdriver, Wire Crimpers, Voltmeter, Hammer, Channel Lock Pliers,Wire Strippers, Non-contact Voltage Detector, Side Cutter Diagonal Pliers, Linesman Pliers, Torpedo Level, Flashlight, Allen Wrench Set (Hex Set) and Razor Blade Knife (Utility Knife).

# 10 Of the best electrician tool belt short review

After the cable tech tool belts, there are some belts for electricians. Any electrician needs to have a strong, durable and lightweight tool belt. Now, we are going to introduce you to 8 of the popular tool belts only for electricians.

1. Gatorback B240 Electrician's Combo With Pro

Gatorback B240 Electrician's Combo With Pro-Comfort Back Support Belt. Heavy Duty Work Belt (Medium 31-35 Inches)

An electrician needs to get a tool belt. He always carries stuff that is necessary. But if it is a pouch, the job is not easy. Gator back brings you the best tool bag for electricians.

The tool belt comes with an average fit for any given waist size. Some bags have a construction which is just not comfortable. You may feel hot and sweaty from them. But this belt is the perfect match for you to have.

The premium quality materials make it a comfortable fit. You will stay safe from a sweaty condition. The belt is made using heavy duty 1250 duratek nylon. This makes the pouch both lightweight and durable.

The bag has 18 pockets and tape chain. So, an electrician can carry a lot of tools in it. The bag has a lot of customization option and the overall support is great. For extra safety measurement, the belt comes with a one-year warranty. Don’t you think this is one of the best electrician tool belt?

Available specs:

  • Dimension: 22 x 14.5 x 5.4 inches
  • Weight: 5.34 pounds
  • Size: medium 31’’ to 35” waist
  • Color: black
  • Material: Nylon


  • Strong and durable
  • Easy to carry
  • Perfect for medium size waist
  • 18 pockets
  • Beautiful design
  • Comes with warranty


  • Weighs a little bit too much
  • Not for large size waist

02Occidental Leather 5590 LG Commercial Electrician's Set

Occidental Leather 5590 LG Commercial Electrician's Set

This specific tool belt comes with hand-specific tool holders so that you. This tool holder is made of leather. All the function of this tool belt is for a modern electrician. You can switch both sides of this bag.

This bag is long-lasting. Other tool bags which are made using nylon are not that good always. Sometimes it is hard to keep your tools on them. But this tool belt is great to carry your tools.

But you need to wait for a few days for the leather to break in. The tool belt it easy to carry and offers a lot of options. The tool belt comes with a manufacturer warranty. This is the best match for you.

Available specs:

  • Dimension: 16 x 16 x 10 inches
  • Weight: 5.2 pounds
  • Material: Leather


  • Strong, durable
  • Can carry a lot of tools
  • Best for electricians
  • Can adjust the size
  • Beautiful design
  • Comes with warranty


  • Leather needs time to brake in
  • A little heavy
Milwaukee 48-22-8110 Electricians Work Belt

You are a residential electrician, and you need your tool belt to be durable. Over sized tool belt can be a pain sometimes. But this tool belt is unlike any other tool belt you have seen before.

The waist size of the belt is another thing to consider. This tool belt comes with adjusting waist size. A 38 inches waist will have a great fit, and you will have a lot of room to spare.

But you will not be able to take a lot of tools using this tool bag. The tool belt can hold the necessary tools you need to complete the necessary residential electric jobs. The tool belt is equipped with a lot of features.

The build quality is durable. There is a lot of space in the toolbar. The pockets are large enough to hold square feet. The bag comes in multi color. Handling and carrying the tool bag is a piece of cake. All these features make it one of the best electrician tool belt.

Available specs:

  • Dimension: 4.5 x 11.5 x 23.6 inches
  • Weight: 4.1 pounds
  • Color: Multi color
  • Material: Multi (Nylon, fabric)


  • Easy to maintain
  • Easy to handle
  • Offers a lot of space for larger tools
  • Waist size compatible up to 40”
  • Great for residential electricians


  • If you have a small waist, it will not fit in

04. Tradesman Pro Electrician's Tool Belt, Large Klein Tools 55428

Tradesman Pro Electrician's Tool Belt, Large Klein Tools 55428

Many electricians like belts with removable pouch. The main advantage of a removable pouch is that it can carry a lot of tools. It is not just about carrying the tools. It is about the organization of the tools. You also need to think about your tool’s safety.

The Tradesman Pro Electrician's Tool Belt, Large Klein Tools 55428 is a perfect choice for you in this case. The wide-open pockets of the tool belt can carry small tools, drills, and spare parts easily. The bag comes with drill bit pocket, loop tape measure and hammer holders.

The bag will be a perfect fit for 35 to 39 inches waist. The bag is made using polyester. So, it can withstand a lot of pressure. But the problem with polyester is that they may make you sweat in hot conditions.

The weight of the whole item is 2.08 ounces. So, the bag is very lightweight, and you will just feel the weight of the tools. This tool belt is great for doing daily electric jobs with ease.

Available specs:

  • Dimension: 11.5 x 13.5 x 10.2 inches
  • Weight: 2.08 ounces
  • Size: large
  • Material: Nylon
  • Color: Multi color


  • Lightweight and can carry a lot of tools
  • The nylon construction makes the tool belt durable
  • Fits right is a 35 to 39 inches waist
  • Comes in large size
  • Looks beautiful
  • Great for starters


  • May face problem with the pockets
  • After a few months the stitching may come off
Gatorback Electricians Combo Deluxe Package (Tool Belt, Suspenders, Gloves, Drill Holster) Ventilated Back Support Belt w/Suspenders and Extras. For Electricians, Carpenters, Framer (Medium 31

Let's just move onto some professional stuff. Professional electricians always need to keep safety measures in mind. This is tough. So they cannot just rely on a tool belt. On the other hand, sometimes electricians need to climb high areas.

This is dangerous as the belt may fall out. So a back strap with the tool belt is a must. For this case, we have just the right tool belt. The bag comes with durable and strong build quality. The bag was made using DuraTeck 1250 fabric with bar-tack stitching.

There are metal rivels in every stress point of the bag. There are overall 17 pockets on the pouch, 18 on the right and 9 on the left. The breathable fabric is air ventilated, which means, you will not sweat in hot conditions.

The tool belt package also includes a hand glove for extra safety measures. The belt is a perfect match for medium size waist. If you have a 31 to 34 inches waist, the belt will fit right in.All these makes it one of the best electrician tool belt.

Available specs:

  • Material: DuraTeck 1250 fabric
  • Color: Black
  • Waist size: 31 inches – 34 inches


  • Tough built quality
  • Breathable air ventilating fabric will reduce sweat in hot condition
  • Comes with 27 pockets, 18 on the right side, 9 on the left
  • Padded back strap installed
  • Comes with hand glove for extra safety measures


  • The stitching comes undone sometimes
  • Back straps are not that supportive
Occidental Leather 5036 LG Leather Pro Electrician Set

Many electricians like leather tool belt. Leather tool belts are great for holding tools. They are both long-lasting and tough. For leather tool belt lovers this is a great choice. The belting leather comes with steel roller buckle.

So, it can withstand the toughest of situation. Basically, electricians face tough situations. This belt will offer plenty of support to them. The belt has 23 different pockets and tool holders. You can organize and place your tools with ease. Leather tool belts are a little heavy.

But unlike other leather tool belts, this bag is quite lightweight. The tool belt has a simple design. Easy to handle and you will find your tools easily by using this belt. Any starter or residential electricians can use this tool belt. One of the best tool bag for electricians no doubt.

Available specs:

  • Dimension: 16 x 16 x 10 inches
  • Weight: 4.3 pounds
  • Color: Red
  • Size: Large


  • Tough construction
  • Easy to handle
  • Easy to carry
  • Comes with 23 pockets for tools
  • Great for starters


  • Leather takes time to brake in

07. Occidental Leather 9596 Adjust-to-Fit Industrial Pro Electrician

Occidental Leather 9596  Adjust-to-Fit Industrial Pro Electrician

Commercial electricians love leather tool belts. They are easy to handle and long-lasting. Leather tool bags are efficient and hand specific. The overall build quality of a leather bag is perfect for every electrician.

Well, let's get back to business. Like the previous one, this is another model from the manufacturer. The belt has hip padding. So, you don't need to install hip padding. You can easily fit it in your waist. Leather tool belts are adjustable. This specific tool belt will fit right in any given waist size.

You can wear the belt for a long period of times. The belt is durable and tough. It can withstand any rough condition. It also comes with a shoulder strap. You can say this is a best belt and shoulder strap combo.

The occidental leather gives you a sweat-free experience in hot conditions. The good quality leather tool belt is well worth it for the price. But the weight may be an issue. Because it weighs a little too much.

Available specs:

  • Dimension: 16 x 16 x 10 inches
  • Weight: 6 pounds
  • Material: Leather
  • Color: Gray
  • Pocket: 23
  • Size: any


  • Premium quality leather construction
  • Easy to handle and maintain
  • Occidental leather provides support on hot conditions
  • Provides enough support for your hips
  • Great for commercial electricians


  • Not available
Occidental Leather 5589 Electrician's Tool Case

Occidental makes the best leather tool case for electricians. The tool bag comes with 25 pockets and can carry a lot of tools. The tool bag includes a heavy-duty chain for electrical tape. You will also get a handy utility clip.

The tool bag was designed mainly for journeyman electrician. The bag weighs just 1.9 pounds. So, you can carry the bag with ease. Mainly this is a greaty pouch for you to attach with your belt.

You can wear the pouch all day long. The good quality leather can withstand any tough situation. This is a great pouch for your tool belt.

Available specs:

  • Dimension: 9 x 4 x 14 inches
  • Weight: 1.9 pounds
  • Material: Leather
  • Pockets: 25


  • Durable and tough build quality
  • Comes with 24 pockets
  • Great for any belt
  • Can hold a lot of tools


  • The pouch is a little heavy

09. CLC Custom Leathercraft 1608 Electrician's

CLC Custom Leathercraft 1608 Electrician's Comfort Lift Combo Tool Belt, 28 Pocket

The first product on our list is a rig tool belt of CLC that is designed for Electricians. Custom Leather Craft Manufacturing Co. Inc is a renowned manufacturer of work aprons, bucket organizer, tool bags, tool belts, knee pads, and suspenders. The evenly distributed weight and the stress points are riveted with top to bottom plated steel washers.

The washer is a disk-shaped plate, commonly used to distribute the load of a threaded fastener like screws or nuts and also helps to prevent galvanic corrosion.

Available specs:

  • Built-in cordless pocket for hanging the drill.
  • Three wide padded belts for a comfortable experience.
  • Double tongue steel roller buckle to adjust fitting.
  • Pouches have flaps on them to prevent spillage of the tools.
  • Gusset stitched pockets give better access & capacity.
  • Ballistic nylon doesn't let dust and debris to sit on the fiber

Ballistic nylon is a kind of thick, sturdy, nylon fabric which can protect wears from flying dust and debris fragmentation caused by any bullet and other artillery shell impacts.

When you bend over, it will not sit straight. Instead, the belt leans over and makes it uncomfortable.


  • Built-in cordless drill pocket.
  • Wide cushioned comfort belt.
  • Double-tongue steel buckle.
  • Zippered top flap on pouch.
  • Ballistic nylon.
  • Gusset stitched pockets. 


  • Bulky suspenders.
  • Impact gun or Makita doesn't stay in place when bent over.
Dead On Tools HDP411014 Pro Electrician's Suspension Rig

Dead On Tools suspension rig provides almost same features like Custom Leather Craft 1608 tool belt, but there are few reasons for which it might not be the perfect choice for you-

  • Its cheap Velcro separators are not so quality full. They come off very quickly and that may be a reason you’ll lose your tools.
  • The shoulder rig doesn't last long.
  • Its Pockets often hang due to weight and don’t have any holster for a hammer.

10. Dead On Tools HD54017 Utility Pouch

Dead On Tools HD54017 Utility Pouch

It is the best belt for any cable technician. This one features multi-function utility pouch which includes plenty of room for the accessories and tools comparing to your standard belt. It allows you to carry it in 3 different ways. Most of the users are pleased with its capaciousness and functionality.

Highlighted Features:

  • 3-way carrying functionality for your comfort.
  • Easy attachment to any belt you wish.
  • Reinforced pockets for extra security.
  • Lightweight fabric material.
  • Heavy duty adjustable belt included (approximately up to 60 inches)
  • Durable pouch with multiple pockets.

3 way carrying functionality- Firstly, you can wear it as a tool belt. Secondly, you can use the handle to carry the pouch as a bag. Finally, If you want hold it over the shoulder.

In fact, customers that expressed displeasure all seemed to agree that the belt loops required further strengthening.


  • Tough built.
  • Handy carry handle.
  • Good quality and cheap.
  • Lots of pockets to put everything.
  • Awesome 3- way carrying system.


  • Better with detachable shoulder strap.
  • Tape measure holder is too low on the bag.

# 6 of the best tool belt for cable tech short review

You need to organize your tools before going to work. When you are working, you cannot just go without your tools. You can't even just carry them on your backpack. You need to get a tool belt for yourself. This toolbelt will help you to organize your tools. But finding the best tool belt is not easy. You need to check out these features. There are a lot of tool belt models available on the market. So, the choice is tough. But we can help you with this matter. We are now going to provide you with short reviews. We shall describe 7 popular tool belts for cable tech. Make sure you check them out.

01. ToughBuilt - Pouch + Shoulder Strap, Adjustable Flashlight Holder

ToughBuilt - Pouch + Shoulder Strap, Adjustable Flashlight Holder, 3 Adjustable Tool Pockets, 25 Pockets and Loops, Tape Measure Clip (Patented ClipTech Hub & Belts) (TB-CT-104)

Every electrician is always on the run. They need to get the perfect tool belt or them. Not just any bag, the bag needs to have strong build quality. The bag also needs to offer a lot of space. The bag should also be portable. 

With all these in mind, if you have 45 bucks at hand, you can check out this tool belt. This is a perfect tool belt for master electricians. The bag has a 6 snugged layer construction. So, the bag is durable and strong.

You will get 25 pockets to carry your tools. The bag can hold flashlights, pliers, screwdrivers, range with ease. You will also get 3 adjustable tool pockets. You can even adjust the straps so that you can fit short or large tools. The non-slip padded shoulder straps make the tool belt portable.

You can carry it easily. There is a notebook pocket for you, and you can carry tons of stuff. The bag comes with a tape measure clip. This is mainly made for electricians who love their work. This is one of the best tool belts for cable tech.

Available specs:

  • Dimension: 10 x 10 x 10 inches
  • Weight: 2.85 pounds
  • Pocket: 25
  • Material: Nylon


  • pouch clips on & off any belt
  • You can kickstand your pouch and tools on the-nearby floor and table
  • Non-slip padded shoulder strap
  • Hub included
  • Wire-tester pocket on the outside
  • Comes with 3 adjustable tool pockets
  • Adjust straps to fit any sized tools
  • Comes with extra-long tape chain
  • Tape measure clip installed
  • Rugged 6-Layer Nylon Construction
  • 25 pockets and loops for better carrying
  • Notebook pocket installed


  • Pockets are rather small
ToughBuilt - Technician 10 Pocket Pouch (Large) | 15 Pockets & Loops, 3 Adjustable Pockets, Long/Short Tools, Holster Accessories, Multi-Tool Organizer (ClipTech Hub & Belts) (TB-CT-36-L10)

If you are looking for something strong, portable, strong and lightweight this is the perfect match for you. The bag has 3 unique and adjustable central pockets with bottoms. This is mainly for longer tools. 

The bag also features 6 tailor-fit screwdriver loops, notebook pocket, tape measure clip, and a pencil pocket. This pouch is mainly made using nylon. So, the pouch can withstand any ruff condition.

The pouch only comes with the color black. This is a great bag for electricians who love their work. The bag includes 15 pockets. The product is quite lightweight. The bag weighs only 1 pound. This bag is durable, easy to carry. It will fit perfectly in your belt. One of the best tool belt for cable tech engineering.

Available specs:

  • Dimension: 14.2 x 6 x 6.2 inches
  • Weight: 1 pound
  • Color: Black
  • Material: Nylon fabric


  • Pouch Clips On & Off Any Belt
  • Hub Included on the bag
  • 3 Adjustable Tool Pockets on the outside
  • Adjust Lower Strap to Fit Long or Short Tools according to your comfort
  • Fits Pliers with Large Handles with ease
  • 6 Snug-Fit Screwdriver Loops
  • Tape Measure Clip
  • Rugged 6-Layer Construction
  • Tape measure clip installed
  • Rugged 6-Layer Nylon Construction
  • Comes with 15 Pockets and Loops
  • Notebook Pocket included


  • Warranty not specified
  • Cannot hold a multi-meter

03. NoCry Heavy Duty Canvas Tool Pouch

NoCry Heavy Duty Canvas Tool Pouch with 7 Roomy Pockets, 10 Tool Loops, Adjustable Waist Strap, and Sturdy Hook'n'Loop Belt Flap. Black

An electrician is always on the run. There is always some work to be finished. A tool belt can always help them to carry their stuff. I don't just mean the tools. They need extra space and many more things. Anyway, you need a bag that can reach your need. Well, this one is one of the best tool belts for any electricians. 

The bag comes with 7 roomy pockets. So, you will get a lot of space to keep your tools safe. The bag may measure just 8.5 by 11.5 inches, but it can carry a lot of important tools for you.

The bag is made of 600D canvas. So, the bag is strong and durable. You don't need to worry about the bag getting torn apart. Even if you do not have a belt, you don't need to worry. The bag comes with a padded waist strap.

So, you can attach it to your waist with ease. The bag is quite lightweight. Which means you will not get an extra weight for the bag. The bag is comfortable to fit onto your waist. This is one of the best tool belt for cable tech.

Available specs:

  • Dimension: 8.5 x 4 x 11.5 inches
  • Weight: 12.89 ounces
  • Color: Black


  • Durable, lightweight and strong
  • Comes with 7 roomy pockets
  • Pocket for your notebook, cellphone
  • Build with 600D canvas


  • No warranty
Toughbuilt Padded Back Support Adjustable Length Tool Belt 32-48

Have you ever thought of a tool belt which is identical to a belt? Well, here is one. This tool belt looks like a waist belt. If you purchase this one, you don't need to buy a belt for yourself. 

The belt is lightweight and fits just right in your waist. You can cut the belt according to your desired length. The extreme duty steel belt buckle makes the belt tough. The tool belt has comfortable padding.

So, you will be comfortable using this belt. The belt will work with all cliptech pouches. If your waist is within 32" to 45" the bag will be a perfect fit. The overall design looks beautiful and you can carry your pouch with ease. This is a great belt for beginners to carry their tool pouch.

Available specs:

  • Dimension: 13.5 x 4.2 x 5.8 inches
  • Weight: 1.54 pounds
  • Color: Black
  • Material: Steel


  • Strong lightweight and durable construction
  • Can wear like a belt
  • Has lots of customization option
  • Adjust the belt according to your waist
  • Can carry every clip tech pouch
  • Waist strap provides comfort


  • Does not have any hooks
  • The zippers are not satisfactory
DEWALT DG5103 Small Durable Maintenance and Electrician's Pouch with Pockets for Tools, Flashlight, Keys

If you are working in a constructing firm or any contracting business, you will always need a tool belt. Mainly the reason is that you need to organize your tools. You need the tool belt to have just the right size, but at the same time, you need the tool belt to have proper organizing option. 

This tool belt can ease your problem. If you need to have your tools close at hand, you can go for this model. The pouch comes with a rear pouch. So, you can stick it to your belt. Especially, electricians need to climb ladders.

This is a perfect solution for them. Maintaining the pouch is easy and you can work with ease. The pouch is made of polyester. So, you don't need to worry about the tool belts durability. This is a perfect partner for electricians.

Available specs:

  • Material: Polyester
  • Weight: 9.1 ounces
  • Size: 1 inch


  • Small and lightweight
  • Easy to maintain
  • Can carry a lot of tools


  • Warranty issue not specified
  • May face problem with belt clip

06. CLC Custom Leathercraft 1509 21-Pocket Zippered

CLC Custom Leathercraft 1509 Zippered Professional Electricians Tool Pouch, 21 Pocket

Every electrician needs a perfect tool belt to carry their tools. When they are working, they need their tools to be on hand. The tool pouch helps them to find the necessary tools at the right moment. 

We introduce you to this tool belt. The tool belt comes with 21 pockets to organize your tools. It also has a zippered cover. So, you can protect your tools when they are not in use. The ergonomic rubber handle and padded shoulder make the tool belt portable. You can carry the pouch with ease.

There are outside pockets to carry your phone and 3 special pockets to carry screwdrivers. This is a great tool belt for electricians. The bag is made using polyester fabric which means the bag is durable and withstand dirt or any ruff condition. The bag has a solid built, and I don't think you need a warranty.

Available specs:

  • Dimension: 12.2 x 4 x 14.5 inches
  • Weight: 2.5 pounds
  • Material: Polyester fabric
  • Color: Beige


  • Comes with a lot of pockets
  • Can carry a lot of tools
  • Portable and durable


  • Do not offer any warranty
  • The pockets are too deep for smaller tools

Buyer guideline: Choosing the best tool belt

Picking a tool belt for yourself may not be a tough decision, right? Well, that is not the case. Whether you are looking for the best electrician tool belt or the best tool belt for cable techs, you need to consider some important things. Now, in this part, we are going to talk about these considerations. You cannot just buy one. You need to check out some key features. Let's check them out.

  • Material: The material is a very important part for any tool belt. Usually, nylon, fabric, polyester or leather is used for making a tool belt. The choice depends on you. Leather tool belts are long lasting. Nylon belts are too. But they can make you sweat in hot condition. On the other hand, the fabric is also good. You need to check out the construction material only for your support. Pick a leather bag according to your use. Leather belts are for a long day working. But for starters, nylon or fabric is the best choice.
  • Weight:The weight is another thing to consider before buying a toolbelt. As I have said earlier, tool belts will make it easy to carry your tools. Every tool has individual weight. If your belt weighs too much, you will not be able to organize your work. On top of that, your hips will receive more pressure. So, you need to check out the weight. For nylon or fabric belts, 1 pound is perfect. For leather belts, 2 pounds is enough.
  • Size: Checking out the waist size is an important priority for any electrician. You should choose a tool belt which will fit perfectly on your waist. Check out the size. You can adjust the leather belts in any given size. But when it comes to nylon or fabric tool belts that are not the case. Some come in medium, some in small and some in large size. Usually, you will find medium-sized belts. So, make sure you check them out. The size is a big issue. Many electrician face problems with the size. So, before you buy, check out the size.
  • Price: Pricing is very important in terms of every product. The price will determine your choice. Before you buy your tool belt, you should check out the features and many more to buy your perfect match. This will help you to pick the model you want for yourself. Anyway, depends on your budget. Check out models depending on your budget.

Accessories of Tool Belt

Hammer holster / Loops: They are often steel or leather made a loop that can hold a heavy hammer. It’s impossible to carry it in a pouch, that’s why the holster is important to be a candidate for the best tool belt.

Drill Holders: They are similar to hammer loops. But they hold the nose of a drill.

Belt Hooks: Though belt hooks are often used to hang belts to the wall or closet, in a tool belt they are used to hang wrenches or lanyards.

Pouches: These pockets are useful for holding small nails and screws. They can be different in depth, size, and construction.

Zippered/Latched pouches: They are added to the belt to protect the sharp or precious tools from getting lost or spilled out of the pouch. The flaps on them are attached with Velcro.

Final Note

Buying the best electricians tool belt isn't an easy task unless you know about the details of everything that to consider before buying them. Electricians need the belt with pouch and lots of pockets to carry all the small tools & parts. As all of the desired quality can't be found in a tool belt, so you should buy easy to access and best value the tool belt.

Let us know if you think any other tool belt or accessories should have been on the list. We will be happy to hear from you. You can also buy best tool belt with suspenders.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.