Best Tool Belt For Cable Tech All Updated Info 2019

Last Updated on

You may need to organize your small tools, before you go to work. Especially, when you going to work, you can't go without your tools. Sometimes, you can't even carry your tools in your backpack. In this case, you may need a tool belt to organize your small tools.

But choosing the best tool belt for cable tech, not an easy task, because there are different types of tool belt available on the market (Some are good and long-lasting, and some are not good at all). Even it wasn't easy for us! our product research team spent more than a week to find the top-rated 6 tool belt for cable tech . After that, we start writing this review guide for you.

We hope, this content makes much easier for you to select the quality tool belt for cable tech. So, if you need a tool belt for cable tech, please read the full content, and pick one for your next project.

# 6 of the best tool belt for cable tech short review


Every electrician is always on the run. They need to get the perfect tool belt or them. Not just any bag, the bag needs to have strong build quality. The bag also needs to offer a lot of space. The bag should also be portable.

With all these in mind, if you have 45 bucks at hand, you can check out this tool belt. This is a perfect tool belt for master electricians. 

The bag has a 6 snugged layer construction. So, the bag is durable and strong. You will get 25 pockets to carry your tools. The bag can hold flashlights, pliers, screwdrivers, range with ease. You will also get 3 adjustable tool pockets. You can even adjust the straps so that you can fit short or large tools. 

The non-slip padded shoulder straps make the tool belt portable. You can carry it easily. There is a notebook pocket for you, and you can carry tons of stuff. The bag comes with a tape measure clip.

This is mainly made for electricians who love their work. This is one of the best tool belts for cable tech.

Available specs:

  • Dimension: 10 x 10 x 10 inches
  • Weight: 2.85 pounds
  • Pocket: 25
  • Material: Nylon

Advantages

  • pouch clips on & off any belt
  • You can kickstand your pouch and tools on the-nearby floor and table
  • Non-slip padded shoulder strap
  • Hub included
  • Wire-tester pocket on the outside
  • Comes with 3 adjustable tool pockets
  • Adjust straps to fit any sized tools
  • Comes with extra-long tape chain
  • Tape measure clip installed
  • Rugged 6-Layer Nylon Construction
  • 25 pockets and loops for better carrying
  • Notebook pocket installed

Disadvantages

  • Pockets are rather small

If you are looking for something strong, portable, strong and lightweight this is the perfect match for you. The bag has 3 unique and adjustable central pockets with bottoms. This is mainly for longer tools.

The bag also features 6 tailor-fit screwdriver loops, notebook pocket, tape measure clip, and a pencil pocket.

This pouch is mainly made using nylon. So, the pouch can withstand any ruff condition. The pouch only comes with the color black. This is a great bag for electricians who love their work. The bag includes 15 pockets. 

The product is quite lightweight. The bag weighs only 1 pound. This bag is durable, easy to carry. It will fit perfectly in your belt. One of the best tool belt for cable tech engineering.

Available specs:

  • Dimension: 14.2 x 6 x 6.2 inches
  • Weight: 1 pound
  • Color: Black
  • Material: Nylon fabric

Advantages

  • Pouch Clips On & Off Any Belt
  • Hub Included on the bag
  • 3 Adjustable Tool Pockets on the outside
  • Adjust Lower Strap to Fit Long or Short Tools according to your comfort
  • Fits Pliers with Large Handles with ease
  • 6 Snug-Fit Screwdriver Loops
  • Tape Measure Clip
  • Rugged 6-Layer Construction
  • Tape measure clip installed
  • Rugged 6-Layer Nylon Construction
  • Comes with 15 Pockets and Loops
  • Notebook Pocket included

Disadvantages

  • Warranty not specified
  • Cannot hold a multi-meter

An electrician is always on the run. There is always some work to be finished. A tool belt can always help them to carry their stuff.

I don't just mean the tools. They need extra space and many more things. Anyway, you need a bag that can reach your need. Well, this one is one of the best tool belts for any electricians.

The bag comes with 7 roomy pockets. So, you will get a lot of space to keep your tools safe. The bag may measure just 8.5 by 11.5 inches, but it can carry a lot of important tools for you.

The bag is made of 600D canvas. So, the bag is strong and durable. You don't need to worry about the bag getting torn apart. Even if you do not have a belt, you don't need to worry. The bag comes with a padded waist strap.

So, you can attach it to your waist with ease. The bag is quite lightweight. Which means you will not get an extra weight for the bag. The bag is comfortable to fit onto your waist. This is one of the best tool belt for cable tech.

Available specs:

  • Dimension: 8.5 x 4 x 11.5 inches
  • Weight: 12.89 ounces
  • Color: Black

Advantages

  • Durable, lightweight and strong
  • Comes with 7 roomy pockets
  • Pocket for your notebook, cellphone
  • Build with 600D canvas

Disadvantages

  • No warranty

Have you ever thought of a tool belt which is identical to a belt? Well, here is one. This tool belt looks like a waist belt. If you purchase this one, you don't need to buy a belt for yourself.

The belt is lightweight and fits just right in your waist. You can cut the belt according to your desired length.

The extreme duty steel belt buckle makes the belt tough. The tool belt has comfortable padding. So, you will be comfortable using this belt. The belt will work with all cliptech pouches. If your waist is within 32" to 45" the bag will be a perfect fit.

The overall design looks beautiful and you can carry your pouch with ease. This is a great belt for beginners to carry their tool pouch.

Available specs:

  • Dimension: 13.5 x 4.2 x 5.8 inches
  • Weight: 1.54 pounds
  • Color: Black
  • Material: Steel

Advantages

  • Strong lightweight and durable construction
  • Can wear like a belt
  • Has lots of customization option
  • Adjust the belt according to your waist
  • Can carry every clip tech pouch
  • Waist strap provides comfort

Disadvantages

  • Does not have any hooks
  • The zippers are not satisfactory

If you are working in a constructing firm or any contracting business, you will always need a tool belt. Mainly the reason is that you need to organize your tools.

You need the tool belt to have just the right size, but at the same time, you need the tool belt to have proper organizing option.

This tool belt can ease your problem. If you need to have your tools close at hand, you can go for this model. The pouch comes with a rear pouch. So, you can stick it to your belt. Especially, electricians need to climb ladders.

This is a perfect solution for them. Maintaining the pouch is easy and you can work with ease. The pouch is made of polyester. So, you don't need to worry about the tool belts durability. This is a perfect partner for electricians.

Available specs:

  • Material: Polyester
  • Weight: 9.1 ounces
  • Size: 1 inch

Advantages

  • Small and lightweight
  • Easy to maintain
  • Can carry a lot of tools

Disadvantages

  • Warranty issue not specified
  • May face problem with belt clip

Every electrician needs a perfect tool belt to carry their tools. When they are working, they need their tools to be on hand. The tool pouch helps them to find the necessary tools at the right moment.

We introduce you to this tool belt. The tool belt comes with 21 pockets to organize your tools. It also has a zippered cover.

So, you can protect your tools when they are not in use. The ergonomic rubber handle and padded shoulder make the tool belt portable. You can carry the pouch with ease.

There are outside pockets to carry your phone and 3 special pockets to carry screwdrivers. This is a great tool belt for electricians. The bag is made using polyester fabric which means the bag is durable and withstand dirt or any ruff condition. The bag has a solid built, and I don't think you need a warranty.

Available specs:

  • Dimension: 12.2 x 4 x 14.5 inches
  • Weight: 2.5 pounds
  • Material: Polyester fabric
  • Color: Beige

Advantages

  • Comes with a lot of pockets
  • Can carry a lot of tools
  • Portable and durable

Disadvantages

  • Do not offer any warranty
  • The pockets are too deep for smaller tools

Buyer guideline: Choosing the best tool belt


Picking a tool belt for yourself may not be a tough decision, right? Well, that is not the case. Whether you are looking for the best tool belt for cable techs, you need to consider some important things. 

Now, in this part, we are going to talk about these considerations. You cannot just buy one. You need to check out some key features. Let's check them out.

Material: The material is a very important part for any tool belt. Usually, nylon, fabric, polyester or leather is used for making a tool belt.

The choice depends on you. Leather tool belts are long lasting. Nylon belts are too. But they can make you sweat in hot condition.

On the other hand, the fabric is also good. You need to check out the construction material only for your support. Pick a leather bag according to your use. Leather belts are for a long day working. But for starters, nylon or fabric is the best choice.

Weight:The weight is another thing to consider before buying a toolbelt. As I have said earlier, tool belts will make it easy to carry your tools.

Every tool has individual weight. If your belt weighs too much, you will not be able to organize your work.

On top of that, your hips will receive more pressure. So, you need to check out the weight. For nylon or fabric belts, 1 pound is perfect. For leather belts, 2 pounds is enough.

Size: Checking out the waist size is an important priority for any electrician. You should choose a tool belt which will fit perfectly on your waist. Check out the size. You can adjust the leather belts in any given size.

But when it comes to nylon or fabric tool belts that are not the case. Some come in medium, some in small and some in large size.

Usually, you will find medium-sized belts. So, make sure you check them out. The size is a big issue. Many electrician face problems with the size. So, before you buy, check out the size.

Price: Pricing is very important in terms of every product. The price will determine your choice. Before you buy your tool belt, you should check out the features and many more to buy your perfect match.

This will help you to pick the model you want for yourself. Anyway, depends on your budget. Check out models depending on your budget.

Accessories of Tool Belt

Hammer holster / Loops: They are often steel or leather made a loop that can hold a heavy hammer. It’s impossible to carry it in a pouch, that’s why the holster is important to be a candidate for the best tool belt.

Drill Holders: They are similar to hammer loops. But they hold the nose of a drill.

Belt Hooks: Though belt hooks are often used to hang belts to the wall or closet, in a tool belt they are used to hang wrenches or lanyards.

Pouches: These pockets are useful for holding small nails and screws. They can be different in depth, size, and construction.

Zippered/Latched pouches: They are added to the belt to protect the sharp or precious tools from getting lost or spilled out of the pouch. The flaps on them are attached with Velcro.

Final Note

Buying the best cable tech tool belt isn't an easy task unless you know about the details of everything that to consider before buying them. 

Cable tech need the belt with pouch and lots of pockets to carry all the small tools & parts. As all of the desired quality can't be found in a tool belt, so you should buy easy to access and best value the tool belt.

Let us know if you think any other tool belt or accessories should have been on the list. We will be happy to hear from you. You can also buy best tool belt with suspenders.