Different Types of Tool Belt All Updated Info 2020

Last Updated on

Tool belts are easy to carry. The places where you can’t bring your toolbox, you can easily take your tools in your tool belt.

Electrician, Plumber or Roofers need to climb high place like electric pole or roof top. They can carry their instrument in their belt.

As each profession requires different sets of tools, there are different types of tool belts to carry them also.

Let's learn which tool belt is the best for the specific work. Read the Electrician tool belt review .

Finding a tool belt in stores or online platforms is easy. But the main problem is to choose the best one for your profession and situation.

There are few factors that you should consider while selecting a tool belt. Before categorizing the belts, we think you should know about these key points on tool belts.

1. Material: The Toolbelt can be made of:

  • Leather
  • Suede Leather
  • Nylon
  • Polyester canvas
  • Cloth

2. Holder: Tool belts should have a separate leather loop for hammer and nose of a cordless drill.

3. Pouch: Tool belts have multiple pouches to reserve nail, screw, chisel and other small equipment.

4. Hooks: Sometimes you get hooks with the belt attached already. If you don’t find hooks in the belt, you can add them manually.

Different tool belts for different profession:

Electrician’s Tool Belt: An Electrician has to face very odd situations. It is fine until he is fixing the electric line in the house but sometimes he has to climb the poles or hang high to fix your Air Cooler outside.

Then he has to carry his tools in his belt. So, his belt should have multiple pouches and enough space for cable terminator, hydraulic machine, Conduit Bender and all other instruments otherwise he will have to come down to pick up the tool again and again.

That’s why having a tool belt with multiple pouches and hook is essential for electricians.

Another thing to consider is the material of the belt. Nylon and Polyester is an excellent insulator. Using the non-conductor material is a smart choice for electricians.

Plumber’s Tool Belt: Plumbers often face wet and moist area. Whether it is a leak in basin or hole in the main pipeline, most of the time they end up with water splashes. That’s why their tool belt should be water resistant.

If they use a leather belt, water may damage the leather unless it is water resistant. Again, Nylon and Polyester stays unharmed while in contact with water.

That’s why; choosing a non-leather material for the belt is the wisest decision for plumbers.

Plumbing does not require too many tools. So, a tool belt for them should have 2-3 pouches and few hooks. More than 2-3 pouches in the belt are unnecessary.

But the pouches should have covers on the top. This cover will protect the tools from water.

Roofer’s Tool Belt: A Roofer usually work by hanging from wall and roof. That’s why he should take all his tools at once.

Multiple pouches and hooks can be helpful to him. As they will hang, their belt should be lightweight too. Nylon and polyester material is comparatively lightweight than Suede leather. They are flexible too.

Another thing, they might carry nails, screws, and nuts. For that, they’ll need few zipped pocket.

Glass Cleaner’s Tool Belt: Glass cleaners usually use a glass wiper and a cleaning agent in their work. Some additional tools may be needed, but that won’t need too much space in the belt. As they don’t have much to carry, they can use any straightforward and sleek belt with couple pouch and hooks.

Another thing to remember, glass cleaning agent can harm suede leather. Try not to use them if you use these cleaning agents. Polyester type synthetic fiber is better for glass cleaners.

Construction worker’s Tool Belt: Construction sites are divided into different sectors. The workers are given a separate duty that’s why a worker does not need to carry as much tool as a Roofer.

Where a roofer has to check all sectors like plaster, shedding, and others at once, a construction site workers are hired for only one particular division. So, there shouldn’t be additional pockets in construction worker’s belt as there will be only a few tools.

Besides, construction sites are very dusty. So, the belt material should be washable. Waterproof leather is good washable material for the belt.

Carpenter’s Tool Belt: Most of the carpenter’s tools are sharp. These sharp tools require thick material to cover them in the belt.

The leather is thicker than polyester and nylon. Because of that, using a leather or suede leather material for the belt is something a carpenter should not neglect. Safety should not be negotiated.

Carpenters often store nails and screws in their pouches. Having a tool belt with multiple pouches can help them in their work.

It will be best if the pouches have cover on them. Some carpenter tools are big. So, a few large pouches is a great addition to the carpenter’s belt.

The materials of the belt should be dust proof otherwise the wood debris will stick to the fabric of the strap.

Painter’s Tool Belt: Few different size brushes are a painter’s first equipment. He doesn’t need many pockets or too many loops. 2-3 pouches and a few hooks are enough to carry the paint brushes.

While they work, paint spills on their cloth and their belt. That’s why it is important to choose a washable fabric for the tool belt. Any synthetic material like nylon or polyester will be a good candidate for it.

Tool belts are an important addition to a worker’s workshop or workplace. Choosing the right type of tool belt is essential. Having a well-equipped belt can ease your work. So, consider the practical situation and pick up the belt that’ll make your work easier and flexible.

Leave a Comment

Show Buttons
Hide Buttons