Best Tool Belt for Electricians & Cable Tech-2018

 An electrician needs a variety of tools for his work. If you are an electrician or a cable tech, sometimes you don't know which tools you need for a job. So, It's not wise to carry a huge tool box with you. The right electrician tool belt  will allow you to carry all your tools comfortably anywhere you go for work.

Tools you often use include a coax connector compression tool, snips, cable cutters, pliers, Measuring devices, Labeling machines, power saws, wire strippers and a continuity tester to name a few.

A durable belt with easy access of the tools will increase your job efficiency , so you can finish your job quickly.

If you already have a tool belt, you can check best tool box/chest in the market.

Checklist for buying an electrician and cable tech tool belt

Tool belts are really important for the professionals. If you are an electrician or cable technician having a tool belt is absolutely necessary.

A tool belt is a part of your workwear and helps you to keep your must-have tools close by. A proper tool belt allows you to focus on your work rather than worrying about your tools.

A decent tool belt can cost you from $50 to $200 or more, but there’s more than only knowing the price when you decide to buy a tool belt.

We will discuss the most important checklist that you should consider before buying an electrician and cable technician tool belt.

 Here is the checklist

Although both of the profession have a different name, somewhere along the way there are few similarities about what they do. Hence, their tool belts are also quite similar but definitely not identical.

Cable technicians have to install, maintain and repair internet services and residential cable televisions.

A basic list of tools for cable technician includes cable installer, cable tester, cable tracker, wire connectors, along with basic wire cutters, pliers, wire strippers, screwdrivers, tape and many more.

An electrician is responsible for electrical wiring of buildings, stationary machines, and related equipment.

A basic list of tools for an electrician includes screwdrivers, hammer, pliers, knives, wire cutter and strippers, hacksaws, drills and many more.

So you get the idea why both of them have a different tool belt. But when you want to buy the best tool belt for both of the profession, these are the things that you should consider.

  • The right category
  • Make sure you are buying the right type of tool belt, and it has the capacity to hold all your tools accordingly. If you are a cable tech then you should go for those made for cable technician, and the other way if you are an electrician.
  • How does it feel?
  • Be sure to try it on and see how does it feels when you wear it. Is it okay with the weight on? Or it just doesn’t feel right to you. Make sure you feel comfortable wearing it, otherwise you will regret afterward.

  • Inspect the quality and material
  • Assess the quality by yourself. Remember, quality matters the most. A good quality tool belt will last longer and provide you with better service.
  • Check the stitches and if the pockets are strong enough to withstand some abuse.
  • The material is also really important according to your profession; you have to make sure the materials are good insulators (e.g. leather or nylon) if you are an electrician.
  • Look out for the quality of the color or external paint on it.
  • Buckle and strap adjustability.
  • You want a simple buckle that should be easy to put, but it should have the sturdy clasp to it. Otherwise you will have to pull it up again and again.
  • Make sure that your desired tool belt has the ability to adjust the strap. It will allow it to perfectly fit in your waist. This is an important functional part of a decent tool belt.

What should you consider while buying a tool belt?

There are few facts you should look for in a standard tool belt for your work. You should search a tool belt depending on how you will use that. If you work with the belt on a daily basis, you need a durable and sturdy fabric in your belt. Again, if you carry too many tools, you should buy a belt that has multiple pockets. Here are few more things you can look for before buying a tool belt :

  • check
    Double stitching
  • check
    Amount of pockets
  • check
    Quality of material, seam, rivet
  • check
    Buckle and strap adjust ability
  • check
    Hammer Holsters
  • check
    Durability & Strength
  • check
    Manufacturer quality

Make the purchase as soon as you find the qualities in a belt. But never ignore the comfort while looking for the suitable belt for your work ever.

Accessories of Tool Belt

 Hammer holster / Loops: They are often steel or leather made loop that can hold a heavy hammer. It’s impossible to carry it in a pouch, that’s why the holster is important to be a candidate for the best tool belt.

 Drill Holders: They are similar to hammer loops. But they hold the nose of a drill.

 Pouches: These pockets are useful for holding small nails and screws. They can be different in depth, size, and construction.

 Belt Hooks: Though belt hooks are often used to hang belts to the wall or closet, in a tool belt they are used to hang wrenches or lanyards.

 Zippered/Latched pouches: They are added to the belt to protect the sharp or precious tools from getting lost or spilled out of the pouch. The flaps on them are attached with Velcro.

What should a Cable operator tool belt contain?

Essential tools for electrician

Some essential tools for electrician-

Small notebook and pen,Fish Tape, Tape Measure, Tongue Tester (Multimeter), Set of basic screwdrivers, Straight-Blade Screwdriver, Wire Crimpers, Voltmeter, Hammer, Channel Lock Pliers,Wire Strippers, Non-contact Voltage Detector, Side Cutter Diagonal Pliers, Linesman Pliers, Torpedo Level, Flashlight, Allen Wrench Set (Hex Set) and Razor Blade Knife (Utility Knife).

Best Tool Belt for Electrician & Cable Tech

Custom Leathercraft 1608 (Best For Electrician)

The first product on our list is a rig tool belt of CLC that is designed for Electricians. Custom Leather Craft Manufacturing Co. Inc is a renowned manufacturer of work aprons, bucket organizer, tool bags, tool belts, knee pads and suspenders. The evenly distributed weight and the stress points are riveted with top to bottom plated steel washers.

The washer is a disk-shaped plate, commonly used to distribute the load of a threaded fastener like screws or nuts and also helpful to prevent galvanic corrosion.

Highlighted Features:

  • hand-o-right
    Built-in cordless pocket for hanging the drill.
  • hand-o-right
    Three wide padded belts for a  comfortable experience.
  • hand-o-right
    Double tongue steel roller buckle to adjust fitting.
  • hand-o-right
    Pouches have flaps on them to prevent spillage of the tools.
  • hand-o-right
    Gusset stitched pockets gives better access & capacity.
  • hand-o-right
    Ballistic nylon doesn't let dust and debris to sit on the fiber.

Ballistic nylon is a kind of thick, sturdy,nylon fabric which can protect wears from flying dust and debris fragmentation caused by any bullet and other artillery shell impacts.

  • When you bend over, it will not sit straight. Instead, the belt leans over and makes it uncomfortable.

Pros

Cons

  Built-in cordless drill pocket.

  Wide cushioned comfort belt.

  Double-tongue steel buckle.

  Zippered top flap on pouch.

  Ballistic nylon.

  Gusset stitched pockets. 

  Bulky suspenders.

  Impact gun or Makita doesn't stay in place when bent over.

Dead On Tools suspension rig provides almost same features like Custom Leather Craft 1608 tool belt, but there are few reasons for which it might not be the perfect choice for you-

  • check
    Its cheap Velcro separators are not so quality full. They come off very quickly and that may be a reason you’ll lose your tools.
  • check
    The shoulder rig doesn't last long.
  • check
    Its Pockets often hang due to weight and don’t have any holster for hammer.

Dead on tools HD54017 Pouch (Best For Cable Tech)

It is the best belt for any cable technician. This one features multi-function utility pouch which includes plenty of room for the accessories and tools comparing to your standard belt. It allows you to carry it in 3 different ways. Most of the users are pleased with its capaciousness and functionality.

Highlighted Features:

  • hand-o-right
    3-way carrying functionality for your comfort.
  • hand-o-right
    Easy attachment to any belt you wish.
  • hand-o-right
    Reinforced pockets for extra security.
  • hand-o-right
    Lightweight fabric material.
  • hand-o-right
    Heavy duty adjustable belt included (approximately up to 60 inches)
  • hand-o-right
    Durable pouch with multiple pockets.

3 way carrying functionality- Firstly, you can wear it as a tool belt. Secondly, you can use the handle to carry the pouch as a bag. Finally, If you want hold it over the shoulder..

  • In fact, customers that expressed displeasure all seemed to agree that the belt loops required further strengthening.

Pros

Cons

  Built-in cordless drill pocket.

  Wide cushioned comfort belt.

  Double-tongue steel buckle.

  Zippered top flap on pouch.

  Ballistic nylon.

  Gusset stitched pockets. 

  Bulky suspenders.

  Impact gun or Makita doesn't stay in place when bent over.

How to organize electrician Tool belt

Final Note

Buying the best electricians tool belt isn't an easy task unless you know about the details of everything what to consider before buying them. Electricians need belt with pouch and lots of pockets to carry all the small tools & parts. As all of the desired quality can't be found in a tool belt, so you should buy easy to access and best value tool belt. 

Let us know if you think any other tool belt or accessories should have been on the list. We will be happy to hear from you. You can also buy best tool belt with suspenders.

Click Here to Leave a Comment Below 4 comments