How to Wear a Tool Belt | A Complete Guide

How to Wear a Tool Belt
127

Tools are professional’s best friend. They always want those tools beside them. But for that, carrying the whole tool chest is a dumb idea. There’s where the tool belt comes. 

A tool belt has ample storage for the most used tool for any work. They have separate pouches for different size instruments. Some of them are covered with flaps, and others are mounted with a thick layer of leather in their mouth. Apart from the facilities of a tool belt, the success lies on how you wear them. Wearing them improperly may cause discomfort. But you can avoid the trouble by taking care of certain adjustment while you wear it. Here are few tips you should follow.

"I hope you already own a tool belt. In spite of that you may like to learn about various tool belt for different work from the latest tool belt review of this year."

  • Attach the removable pouch and tool holder where they belong before you put on the belt. It will be uncomfortable to add them once you wear the belt. If you don’t have removable holders and pouches, you don’t need to bother for this tip.
  • One thing you should remember, don’t bring along additional pouches with you. Take only as many as you need. Too many pockets can make the belt look bulky.

  • Most common mistake people do while wearing a tool belt is filling the pouches before wearing. A heavy tool belt cannot be easily configured. If you need to adjust the strap for comfort, I would suggest packing the instruments in the tool belt after you have put them on and adjusted the buckle.
  • To prevent the nail apron from slipping down from the waist, tear through your back belt hook of pant before tying the string on the nail apron.
  • Once you put them on, start attaching extra tool holster hooks, lifting tong, lifting hook in the belt. Some belt might have them already attached. But in most cases, they are not. So, before putting the equipment in the pouch, add these additional parts.
  • After inserting the additional parts, you can now start putting your tools in their places. Choose the pouches carefully. Use small and covered pockets to store nails, screws, etc. Put bigger instruments in open and broad pouch. If you don’t have tool Tong and hook, put the hammer in an open and leather lined pouch that stays open. Store the frequently used instruments in the most accessible pocket beside your dominant hand side. For example, If you are right-handed, pick a pocket to store them from the right side.
  • If your tool belt has holsters, place heavy tools on them like a hammer, wrench, etc. Remember to check the hook size because these holsters are only made for the certain size of tool. Placing a small hammer in comparatively big hook can end up being the reason of the hammer falling on your feet while walking. Cross check these things twice. To hold the hammer holster in one place, double loop the belt string through the holster before you out on your belt. It also prevents the hammer holster to fall off when you take the belt off.
  • Make sure the pockets, lifting, hook, holster do not come in your way while you walk. Always place the additional parts on your side and keep the tools high from the ground. If you place the holster in front of your thigh, the hammer will strike you whenever you move. So make sure it do not hit your leg.
  • Balance the both side of the belt. Try storing equal weight of tools on the two side. It is efficient, and it will also make the belt more flexible to use.
  • Keep the belt over the navel. If you retain the belt below your waistline, there is a good amount of chance of slipping it from there. But if you place the belt over the navel and tighten it, pelvic bones will make sure it stays in the place.
  • Don’t make the belt too tight that you cannot bend down. Make enough room for your waist to squeeze and expand through your movement.
  • Avoid placing tools in your back. When you put the belt on, keep the tools on the side. If you keep some of them over your butt, You won’t be able to sit as long as you have them on. Don’t be like the guy in this picture.
  • Before you leave, make sure your movement is smooth and comfortable enough for work. The main reason to wear a tool belt is to be more flexible in work by using a belt instead of the tool chest. But if your movement is not flexible enough to concentrate on work, there is no value for all the struggle of buying and adjusting the tool belt.

These suggestions are sufficient to lessen your stress and discomfort regarding the tool belt. Keep the things in mind and you are good to work with your tool belt. This post also help you to wear tool belt properly.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.